RS11 template
RS11 template
by buzz456 » Fri Mar 06, 2026 10:00 am
Anybody have a blank RS11 template laying around?
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 21235
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: RS11 template
by mindenjohn » Fri Mar 06, 2026 10:25 am
I don't remember ever seeing one. The original releases were the Pennsy and a Lehigh Valley version (one via Steam the other direct from vR).
edit: The Steam version was the Pennsy and the Lehigh Valley is still on vR's website.
edit: The Steam version was the Pennsy and the Lehigh Valley is still on vR's website.
John
I've a good memory for whatever I can remember!
If you wait for perfection you will never do anything but it doesn’t stop you wanting it.
Age doesn’t stop you, it just slows you down.
If you only learn one thing in life - learn to think how your actions and words affect others BEFORE doing or saying.
I've a good memory for whatever I can remember!
If you wait for perfection you will never do anything but it doesn’t stop you wanting it.
Age doesn’t stop you, it just slows you down.
If you only learn one thing in life - learn to think how your actions and words affect others BEFORE doing or saying.
- mindenjohn
- Posts: 1773
- Joined: Fri Oct 05, 2018 4:34 am
- Location: West Yorkshire, UK
Re: RS11 template
by spartantrain32 » Fri Mar 06, 2026 10:56 am
had to dig to really find this
https://thelocoshop.wixsite.com/theloco ... -downloads
scroll a bit and you'll find the RS-11 textures.
https://thelocoshop.wixsite.com/theloco ... -downloads
scroll a bit and you'll find the RS-11 textures.
- spartantrain32
- Posts: 575
- Joined: Mon Dec 17, 2012 1:03 pm
Re: RS11 template
by slick204 » Fri Mar 06, 2026 11:12 am
I have one by MDurdan if you still need it.
-
slick204 - Posts: 523
- Joined: Fri Mar 23, 2012 8:29 pm
- Location: Minnesota
Re: RS11 template
by buzz456 » Fri Mar 06, 2026 12:09 pm
spartantrain32 wrote:had to dig to really find this
https://thelocoshop.wixsite.com/theloco ... -downloads
scroll a bit and you'll find the RS-11 textures.
Thank you.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 21235
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: RS11 template
by buzz456 » Sun Mar 08, 2026 5:41 pm
Chugging along on this thing. Lot's of bits and pieces on this model.
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 21235
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: RS11 template
by Chacal » Sun Mar 08, 2026 6:28 pm
One of my preferred engines in the game gets a new dress!
Over the hill and gathering speed
- Chacal
- Site Admin
- Posts: 6589
- Joined: Tue Jul 05, 2011 1:11 pm
- Location: Quebec, Canada
Re: RS11 template
by buzz456 » Mon Mar 09, 2026 7:17 pm
Pretty close to going out for beta.
You do not have the required permissions to view the files attached to this post.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 21235
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: RS11 template
by buzz456 » Mon Mar 09, 2026 8:16 pm
Anyone have any ideas if it's possible to get this thing to run short hood forward?
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 21235
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: RS11 template
by mindenjohn » Tue Mar 10, 2026 6:52 am
buzz456 wrote:Anyone have any ideas if it's possible to get this thing to run short hood forward?
Wouldn't that be something!
John
I've a good memory for whatever I can remember!
If you wait for perfection you will never do anything but it doesn’t stop you wanting it.
Age doesn’t stop you, it just slows you down.
If you only learn one thing in life - learn to think how your actions and words affect others BEFORE doing or saying.
I've a good memory for whatever I can remember!
If you wait for perfection you will never do anything but it doesn’t stop you wanting it.
Age doesn’t stop you, it just slows you down.
If you only learn one thing in life - learn to think how your actions and words affect others BEFORE doing or saying.
- mindenjohn
- Posts: 1773
- Joined: Fri Oct 05, 2018 4:34 am
- Location: West Yorkshire, UK
Re: RS11 template
by GreatNortherner » Tue Mar 10, 2026 1:57 pm
buzz456 wrote:Anyone have any ideas if it's possible to get this thing to run short hood forward?
It's been a while / a few years, but I think one of them was set up long hood forward from the vR "factory". Likely the PRR unit.
-
GreatNortherner - Posts: 1597
- Joined: Sun Feb 15, 2009 11:19 am
- Location: Czech Republic
Re: RS11 template
by mindenjohn » Tue Mar 10, 2026 2:09 pm
Both versions currently available are set up for long hood forward, the PRR version (Steam) and the Lehigh Valley version (vR direct).
John
I've a good memory for whatever I can remember!
If you wait for perfection you will never do anything but it doesn’t stop you wanting it.
Age doesn’t stop you, it just slows you down.
If you only learn one thing in life - learn to think how your actions and words affect others BEFORE doing or saying.
I've a good memory for whatever I can remember!
If you wait for perfection you will never do anything but it doesn’t stop you wanting it.
Age doesn’t stop you, it just slows you down.
If you only learn one thing in life - learn to think how your actions and words affect others BEFORE doing or saying.
- mindenjohn
- Posts: 1773
- Joined: Fri Oct 05, 2018 4:34 am
- Location: West Yorkshire, UK
Re: RS11 template
by buzz456 » Tue Mar 10, 2026 6:54 pm
GreatNortherner wrote:buzz456 wrote:Anyone have any ideas if it's possible to get this thing to run short hood forward?
It's been a while / a few years, but I think one of them was set up long hood forward from the vR "factory". Likely the PRR unit.
What I need is the cab turned so the short hood forward is correct. I have the loco running short hood forward just haven't puzzled how to get the cab going that way.
Buzz
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
39 and holding.
"Some people find fault like there's a reward for it."- Zig Ziglar
"If you can dream it you can do it."- Walt Disney
-
buzz456 - Site Admin
- Posts: 21235
- Joined: Sun Mar 21, 2010 8:30 am
- Location: SW Florida
Re: RS11 template
by GreatNortherner » Wed Mar 11, 2026 3:32 am
buzz456 wrote:What I need is the cab turned so the short hood forward is correct. I have the loco running short hood forward just haven't puzzled how to get the cab going that way.
Ah, got it. Sorry, I misread your earlier post and thought you were looking for a long-hood forward version.
I don't think flipping or moving the cab is doable without changing it directly in the source 3D model. As far as I can remember, there aren't any directional/positional parameters for the cab model in the blueprints (like there are for child objects).
If you're willing to sacrifice the entire functionality and animations of the cab, maybe you can use it as a child object and move it into the desired position there and then delete the actual cab reference from the loco BP.
-
GreatNortherner - Posts: 1597
- Joined: Sun Feb 15, 2009 11:19 am
- Location: Czech Republic
17 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 4 guests